Engineered in India. Prepared for global industrial requirements.
Dynalektric supplies magnetics, DC power systems, control panels and engineered assemblies with structured documentation, testing coordination and export support for international industrial buyers.
Global Reach & Industries Served
Dynalektric supports industrial customers across multiple regions and sectors with engineered products and export coordination.
Export Product Portfolio
Core product groups prepared for international industrial applications.
| Product Group | Indicative HS Heading | Rating Range | Documentation | Customisation Capability |
|---|---|---|---|---|
Magnetics
| HS 8504 | 50 VA to 5 MVA, up to 36 kV class | IEC 60076 / IS 2026 test reports, GA drawings, BoM, QAP | Taps, impedance, low-loss core, shielding |
Control Panel Assemblies
| HS 8537 | Up to 6300 A, Form 2 to 4b | IEC 61439 type and routine tests, GA, wiring, FAT protocol | Layout, form separation, busbar rating |
Power Electronics Systems
| HS 8504.40 | 24 V to 220 V DC, up to 400 A | Functional, efficiency and burn-in reports, conformance notes | Chemistry, connectivity (CAN, Modbus, RS485), enclosure |
Cross-Segment Solutions
| HS 8544 / 8537, varies | LV to MV configurations, per component | Component datasheets, drawings, type-test references where applicable | OEM-specific configurations to customer QAP |
- LV transformers
- MV transformers
- K-rated transformers
- Air-core reactors
- Oil-cooled reactors
- De-tuned reactors
- Locomotive panels
- Driver desk panels
- PDUs
- Power panels
- MHE battery chargers
- Float cum boost chargers
- Special application battery chargers
- Busbars
- Cable harnessing
- UPS
- Driver's Display Unit
- Current sensors
- DC-DC converters
- Fire detection units
- Minimum voltage relays
Indicative HS headings are confirmed per product and destination. Final classification is set at quotation.
Trust & Verification
Legal identity, independent verification and financial readiness for procurement onboarding. Values shown as placeholders are confirmed with client-approved data.
No.49/2 Vaderamanchanahalli Village, Kallubalu, Anekal Taluk, Jigani Hobli,
Bangalore, India - 560105
Approved customer logos, anonymous case studies and approved testimonials are shared once the supplier qualification request is reviewed.
Certifications and Standards
A three-status view across management systems and product or market standards. Status reflects current position and is confirmed with certificate references on request.
Management systems
Certificate reference and validity provided on request.
Certificate reference and validity provided on request.
Certificate reference and validity provided on request.
Status subject to client confirmation.
Product and market standards
requirement
requirement
requirement
Products designed and routine / type tested to this standard.
Type-tested assembly evidence available per order.
Applied where relevant to product category.
Evaluated based on product, directive and destination.
Evaluated based on product and order requirement.
Evaluated based on rolling-stock requirement.
Only currently held certifications are displayed as held. Additional market approvals are evaluated based on product, destination and order requirements. Certificate numbers and validity dates are provided on request and verification.
Destination Market Clearance Schemes
Select a destination country and product group to view a likely compliance path. Schemes shown are indicative and confirmed per product and order.
Magnetics into USA
North America- 01Applicable UL / NRTL product safety requirements reviewed
- 02Product testing and certification route confirmed where required
- 03Technical documentation and test evidence prepared for review
- 04Importer and customer compliance requirements confirmed
Destination-market requirements are reviewed based on product category, intended application, destination country and importer responsibilities. Final approval remains subject to the relevant authority and conformity process. We do not guarantee customs clearance or automatic acceptance.
- ISO / IEC 17025 laboratory reports, where accepted
- IECEE CB scheme reports, where applicable
- Local testing requirements depend on product, market and importer responsibilities
Export Capability Overview
Structured quality systems, trade compliance processes and sustainability readiness support international customer requirements.
- In-house engineering
- Cross-functional engineering teams
- Capacity planning
- DFMEA discipline
- First-Time-Right approach
- Digital production tracking
- Product traceability
- Inspection checkpoints
- Calibration controls
- Documented quality review
We welcome customer inspection, third-party inspection and Factory Acceptance Tests based on agreed project requirements.
Inspection plan
Hold and witness points by stage
FAT checklist
Factory acceptance test scope
Calibration record
Instrument calibration status
Traceability record
Material to dispatch lineage
Quality documentation pack
Consolidated per order
Export Process Journey
Eight structured steps across four phases — from initial enquiry to delivery and after-sales support.
Customer drawings, application requirements and compliance expectations reviewed.
- Drawings review
- Technical clarification
- Customer discussions
Commercial offer prepared with delivery schedule, Incoterms and lead time commitments.
- Commercial offer
- Incoterms
- Lead time estimation
Design, planning and manufacturing executed for the confirmed order.
- Transformers
- Control Panels
- Battery Chargers
- Custom assemblies
Routine quality tests and Factory Acceptance Tests conducted before dispatch.
- Routine tests
- Factory Acceptance Test
- Third-party inspection
Export documentation prepared and verified for international shipment compliance.
- Packing List
- Commercial Invoice
- Certificate of Origin
- Test Certificates
Export clearance and freight coordination managed end-to-end.
- Export clearance
- Freight coordination
- Customs support
Shipment dispatched on schedule with material handling and customer coordination.
- On-time shipment
- Material handling
- Customer coordination
Technical assistance, spare part guidance and responsive customer communication post-delivery.
- Technical support
- Spare assistance
- Customer communication
Indicative sequence. Specific milestones are aligned with customer project requirements and confirmed at order.
Resources
Documentation packages, Incoterms, logistics support and after-sales terms for international orders.
- Commercial Invoice
- Packing List
- Shipping Bill
- Bill of Lading or Airway Bill
- Certificate of Origin
- Product test report
- Certificate of Conformity
- MSDS
- Warranty certificate
- Inspection record
- FAT documentation
Final Incoterms, payment terms and delivery responsibilities are confirmed in the quotation.
- Export-grade packing
- Product identification and labelling
- Container-loading coordination
- Freight-forwarder coordination
- Dispatch tracking
- Indicative lead time by product family
Indicative lead time is shared by product family. Fixed dates are confirmed at order.
- Warranty terms confirmed per order
- Remote support
- On-site commissioning, where agreed
- Spares availability
- Structured complaint resolution process
Frequently Asked Questions
MOQ depends on product group and configuration. Engineered items are quoted per requirement; component items may carry a batch minimum. Confirmed in the quotation.
Yes. Magnetics, panels and power electronics are engineered to application. Share ratings, standards and interfaces and the engineering team reviews feasibility.
Currently held certifications are listed in the certifications matrix. Destination-market approvals such as SASO, G-Mark, SONCAP and PVoC are reviewed per product and country during quotation.
Transaction methods and payment terms are confirmed in the quotation, subject to order value, destination and Incoterms.
Indicative lead time is shared by product family during quotation. Fixed dates are confirmed at order, after specification freeze and inspection planning.
We support customer inspection, third-party inspection and FAT against an agreed inspection plan with defined hold and witness points.
Product category, application and load profile, destination market and standards, quantity, and documentation or inspection scope. One supporting document can be attached.
Application-specific datasheets are provided on request per sub-category. Request them with your RFQ or supplier qualification.